Overview - Assembly Mounts
1-7 - Engine Mount
- Refer to OVERVIEW - ASSEMBLY MOUNTS
8 - Pendulum Support
- Removing and Installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
9 - Bolt
- Tightening Specification. Refer to Fig 2.
- Always replace
10 - Bolt
- Tightening Specification. Refer to Fig 2.
- Always replace
11 - Bolt
- Tightening Specification. Refer to Fig 2.
- Always replace
12 - Bolt
- 60 Nm + 90°
- Always replace
13 - Bolt
- 60 Nm + 90°
- Always replace
14 - Transmission Mount
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
15 - Bolt
- 50 Nm + 90°
- Always replace
Pendulum Support Tightening Specifications and Sequence
-- Tighten the bolts in the steps in the sequence shown:
| Step | Bolts | Tightening Specifications/Additional Turn |
|---|---|---|
| 1. | -2 and 3- | 60 Nm |
| 2. | -1- | 130 Nm |
| 3. | -1 to 3- | 90° additional turn |