Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI

-- Unclip the cover -1- using the clip release lever in direction of -arrows A, B, C- by carefully inserting the clip release lever between the windshield and the cover.

-- Repeat the procedure on the opposite side.

-- Disengage the front cover and remove toward the rear.

-- Free up the connector -2- and disconnect.

Courtesy of AUDI

-- Release the retainers -1 and 4- and remove the lens -3- forward from the mount in direction of -arrow-.

-- Push the clip -5- toward the vehicle interior in direction of -arrow- and guide the support -6- for the Driver Assistance Systems Front Camera -R242- -1- downward and out the mount -7-.

Courtesy of AUDI

-- Remove the Driver Assistance Systems Front Camera -R242- to the right from the retaining plate mount -2-.

-- Release the connector -3- and antenna wire -4- and disconnect.