Night Vision System Camera -R212-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The Night Vision System Camera -R212- is located in the radiator grille.

Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the lock carrier cover. Refer to Front Bumper .

-- Remove the upper air duct. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .

-- Release the clamp -arrow- and remove the washer fluid hose -1-.

Fig 1: Removing Washer Fluid Hose

Courtesy of AUDI

-- If necessary seal the washer fluid hose.

-- Remove the bolts -arrows-.

Courtesy of AUDI

-- Remove the Night Vision System Camera -R212- with the retaining plate -1- from the radiator grille and guide it out upward. Pay attention that the spray nozzle is not damaged.

-- Release and disconnect the connector -2- from the Night Vision System Camera -R212-.

-- Remove the bolts -arrows-.

Courtesy of AUDI

-- Remove the Night Vision System Camera -R212- -1- from the retaining plate -2-.