Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the connector for damage, contact corrosion and water ingress, and service if necessary. Refer to WIRING HARNESS AND CONNECTOR REPAIRS .
-- Adjust the laser distance regulation control module. Refer to LASER SENSOR (Laser Distance Regulation Control Module -J1122-), ADJUSTING, FROM PRODUCT IMPROVEMENT .