Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- A control module that has fallen down cannot be used again.
- When inserting the control module, never apply pressure on the housing upper section.
-- Insert the Windshield Projection Head Up Display Control Module -J898- and tighten the bolts.
-- Mount the windshield and secure it - do not bond it.
-- Turn on the ignition and check the Windshield Projection Head Up Display Control Module -J898- function.
- A number must be visible on the windshield.
-- Calibrate the Windshield Projection Head Up Display Control Module -J898-. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .