Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | WORKING WITH A/C SERVICE STATION (1 Of 2) / WORKING WITH A/C SERVICE STATION (2 Of 2) | ||
| Torque | Refer to the appropriate procedure OVERVIEW - A/C COMPRESSOR POWER UNIT | ||
| Axle Nut/Hub Nut | |||
| Front | 200 Nm +180° | ||
| Rear | 200 Nm +180° | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | HYDRAULIC SYSTEM | ||
| Disc Brakes | FRONT BRAKES , or REAR BRAKES | ||
| Torque | Refer to the appropriate procedures, HYDRAULIC SYSTEM , FRONT BRAKES , or REAR BRAKES | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | Refer to the appropriate procedure OVERVIEW - GENERATOR | ||
| Drive Belts | |||
| Adjustment | |||
| 2.0L CYMC | RIBBED BELT, REMOVING AND INSTALLING | ||
| 3.0L CWGD | RIBBED BELT, REMOVING AND INSTALLING | ||
| Belt Routing | |||
| 2.0L CYMC | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| 3.0L CWGD | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | |||
| 2.0L CYMC | COOLING SYSTEM, CHECKING FOR LEAKS | ||
| 3.0L CWGD | COOLING SYSTEM, CHECKING FOR LEAKS | ||
| Thermostat R & I | |||
| 2.0L CYMC | Refer to the appropriate procedure COOLANT PUMP/COOLANT THERMOSTAT | ||
| 3.0L CWGD | Refer to the appropriate procedure COOLANT PUMP/COOLANT THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L CYMC | Refer to the appropriate procedure COOLANT PUMP/COOLANT THERMOSTAT | ||
| 3.0L CWGD | Refer to the appropriate procedure COOLANT PUMP/COOLANT THERMOSTAT | ||
| Engine Mechanical | |||
| 2.0L CYMC | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL PRESSURE, CHECKING | ||
| Overhaul | ENGINE ASSEMBLY [CYMC] , CRANKSHAFT, CYLINDER BLOCK [CYMC] , or CYLINDER HEAD, VALVETRAIN [CYMC] | ||
| Torque | Refer to the appropriate procedures ENGINE ASSEMBLY [CYMC] , CRANKSHAFT, CYLINDER BLOCK [CYMC] , or CYLINDER HEAD, VALVETRAIN [CYMC] | ||
| 3.0L CWGD | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL PRESSURE, CHECKING | ||
| Overhaul | ENGINE ASSEMBLY [CWGD, DECA] , CRANKSHAFT, CYLINDER BLOCK [CWGD, DECA] , or CYLINDER HEAD, VALVETRAIN [CWGD, DECA] | ||
| Torque | Refer to the appropriate procedures ENGINE ASSEMBLY [CWGD, DECA] , CRANKSHAFT, CYLINDER BLOCK [CWGD, DECA] , or CYLINDER HEAD, VALVETRAIN [CWGD, DECA] | ||
| Fluid Specifications | Refer to the appropriate Maintenance service information. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm + 90° | ||
| Fuel System | |||
| Pressure Specification | |||
| 2.0L CYMC | Refer to the appropriate procedure TRANSFER FUEL PUMP -G6-, CHECKING | ||
| 3.0L CWGD | Refer to the appropriate procedure TRANSFER FUEL PUMP -G6-, CHECKING | ||
| Fuel Pressure Test Procedure | |||
| 2.0L CYMC | TRANSFER FUEL PUMP -G6-, CHECKING | ||
| 3.0L CWGD | TRANSFER FUEL PUMP -G6-, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Coil-On-Plug | ||
| Ignition Wires (Routing) | Coil-On-Plug | ||
| Spark Plug | |||
| 2.0L Engine | N/A | ||
| 3.0L Engine | N/A | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | Refer to the appropriate procedure OVERVIEW - STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | AXLE ALIGNMENT | ||
| Torque | N/A | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||