LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2021 >> S6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Wiring) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Garage Door Opener Control Module, Removing And Installing, Version 1 >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Garage Door Opener Control Module, Removing And Installing, Version 1: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5, 2022 Audi A5 Quattro, 2021 Audi S5, and 2021 Audi RS 5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Garage Door Opener Control Module
GWWA97-12919Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -5- and free up the wiring harness -3-.

-- Release the retainers -4-.

-- Remove the control module -1- from the mount -2- in direction of -arrow-.