ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2022 Audi RS 6 Avant and 2021 Audi RS 6 Avant. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Measure the dimension -a- at the adjuster using the Digital Caliper : VAS6335 and correct if necessary.

Dimension -a- = 60.8 mm.