Protective Window, Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

The Night Vision System Camera -R212- is removed

NOTE:

If the protective window is no longer water tight due to damage, the Night Vision System Camera -R212- must be completely replaced. Refer to Night Vision System Camera -R212-, REMOVING AND INSTALLING .

-- Push the retaining tabs -arrows- together and turn the cover approximately 90° counter-clockwise.

Fig 1: Turning Cover Approximately 90 Degrees Counter-Clockwise

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover, protective window and seal from the Night Vision System Camera -R212-.

NOTE:

Replace the seal after every removal.

Installing

Install in the reverse order of removal while noting the following:

-- Calibrate the night vision system camera. Refer to INFRARED SYSTEM, CALIBRATING .

Tightening Specifications

Refer to OVERVIEW - NIGHT VISION SYSTEM CAMERA