Rear Peripheral Camera -R246-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
The Rear Peripheral Camera -R246- is integrated in the Release Button in Rear Lid Handle -E234-. The Rear Peripheral Camera -R246- and the Release Button in Rear Lid Handle - E234- cannot be separated. If damaged, the entire Release Button in Rear Lid Handle -E234- must be replaced with the peripheral camera.
-- Remove and install the Release Button in Rear Lid Handle -E234-. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
- After removing and installing the Rear Peripheral Camera -R246-, it must be calibrated. Refer to PERIPHERAL CAMERA, CALIBRATING .