Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | WORKING WITH A/C SERVICE STATION (R1234YF) | ||
| Torque | OVERVIEW - A/C COMPRESSOR POWER UNIT | ||
| Axle Nut/Hub Nut | |||
| Front | 200 Nm +180° | ||
| Rear | 200 Nm +180° | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | HYDRAULIC SYSTEM | ||
| Disc Brakes | |||
| FRONT BRAKES | |||
| REAR BRAKES | |||
| Torque | HYDRAULIC SYSTEM / FRONT BRAKES / REAR BRAKES | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | OVERVIEW - GENERATOR | ||
| Drive Belts | |||
| Belt Routing/Adjustment | |||
| Refer to appropriate information | RIBBED BELT, REMOVING AND INSTALLING / OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the approrpiate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | Checking the Pressure Relief Valve in the Version 1 Cap | ||
| Thermostat/Water Pump R & I | |||
| 3.0L | COOLANT PUMP/COOLANT THERMOSTAT | ||
| Engine Mechanical | |||
| 3.0L | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | |||
| Oil pressure when the vehicle is idling is minimum 0.9 bar (13.05 psi) | |||
| Oil pressure at 2, 000 RPM is minimum 1.3 bar (18.85 psi) | |||
| Overhaul | ENGINE ASSEMBLY / CYLINDER HEAD, VALVETRAIN / CRANKSHAFT, CYLINDER BLOCK | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm + 90° | ||
| Fuel System | |||
| Pressure Specification | |||
| 3.0L | Specified value: 4.5 bar (65.3 PSI) positive pressure | ||
| Fuel Pressure Test Procedure | |||
| Refer to the appropriate information | Transfer Fuel Pump -G6-, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires | Coil-On-Plug | ||
| Spark Plug | |||
| 3.0L | 101 905 611 G | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | Refer to the approriate procedure OVERVIEW - STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | AXLE ALIGNMENT | ||
| Torque | N/A | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||