ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Measure the dimension -a- at the adjuster using the Digital Caliper :VAS6335 and correct if necessary.

Dimension -a- = 60.8 mm (2.39 in.).