Overview - Driver Assistance Systems Control Module

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Assistance Systems Control Module

Courtesy of AUDI OF AMERICA, LLC

Bracket
- There are different versions. Refer to the Parts Information.
- For the Driver Assistance Systems Control Module -J1121-
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Bolt
- 8 Nm
- Quantity: 2
Impact Guard
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Bolt
- 8 Nm
  - Control module "Low" : quantity: 2
  - Control module "High" : quantity: 3
Clip
- Attaching the impact guard to bracket
Bolt
- 4.5 Nm
- For impact guard
- Quantity: 3
Bolt
- 8 Nm
- Only on control module "Low"
Bolt
- 8 Nm
- Only on control module "High"
Bolt
- 4.5 Nm
- For bracket
- Quantity: 3
Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Connector
Connectors
- Allocation