Overview - Laser Distance Regulation Control Module
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- For the washer nozzle
- Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Adjusting. Refer to LASER SENSOR (Laser Distance Regulation Control Module -J1122-), ADJUSTING, FROM PRODUCT IMPROVEMENT .
- Mount
- For Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Bolt
- 6 Nm
- Adjuster
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Note the adjustment dimension. Refer to Installing .
- Spring
- Washer Fluid Hose
- Spray Nozzles
- For Laser Distance Regulation Control Module -J1122-
- Overview. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
- Bolt
- Tightening specification. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
- Quantity: 2
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Quantity: 4
- Bolt
- 6 Nm
- Quantity: 2
Tightening Specifications and Sequence Laser Distance Regulation Control ModuleJ1122 with bracket 5
-- Tighten the bolts in the steps in the sequence shown:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1 to 4- | Install all the way by hand |
| 2. | -1 to 4- | 4 Nm |