Windshield Projection Head Up Display Control Module, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI

-- Remove the windshield. Refer to the appropriate Service Information. .

-- Remove the upper cover -2- from the instrument panel -1- using the Wedge Set:T10383/1 .

-- Cover the control module -3- with a soft towel.

Courtesy of AUDI

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- Only remove the designated bolts from the control module.

- Never remove the bolts for the housing upper section.

-- Remove the bolts -1, 2, 4-.

-- Lift the control module slightly and disconnect the connector.

-- Remove the control module.