Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning |
|||
| Service | WORKING WITH A/C SERVICE STATION (R1234yf) (1 of 2) and WORKING WITH A/C SERVICE STATION (R1234yf) (2 of 2) or A/C SYSTEM, GENERAL INFORMATION (R134a) |
||
| Torque | N/A | ||
| Axle Nut/Hub Nut | |||
| Front | 200 Nm +180° | ||
| Rear | 200 Nm +180° | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | N/A | ||
| Disc Brakes | N/A | ||
| Torque | Refer to the appropriate procedures, Hydraulic Components N/A Mechanical Components N/A |
||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | |||
| 2.0L (DMFB) | RIBBED BELT, REMOVING AND INSTALLING | ||
| 3.0L (DCDB) | OVERVIEW - BELT PULLEY SIDE SEALING FLANGE | ||
| 4.0L (DCUE) | RIBBED BELT, REMOVING AND INSTALLING | ||
| Belt Routing | |||
| 2.0L (DMFB) | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| 3.0L (DCDB) | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| 4.0L (DCUE) | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | |||
| Blue Cap | 1.4 to 1.6 bar (20.30 to 23.20 psi) | ||
| Black Cap | 1.6 to 1.8 bar (23.2 to 26.1 psi) | ||
| Thermostat R & I | |||
| 2.0L (DMFB) | OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT | ||
| 3.0L (DCDB) | OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT | ||
| 4.0L (DCUE) | OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L (DMFB) | COOLANT PUMP, REMOVING AND INSTALLING | ||
| 3.0L (DCDB) | COOLANT PUMP, REMOVING AND INSTALLING | ||
| 4.0L (DCUE) | COOLANT PUMP, REMOVING AND INSTALLING | ||
| Engine Mechanical | |||
| 2.0L (DMFB) | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL FILTER/OIL PRESSURE SWITCH |
||
| Overhaul | 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN | ||
| Torque | Refer to the appropriate procedure in 10 ENGINE ASSEMBLY
, 13 CRANKSHAFT, CYLINDER BLOCK
and 15 CYLINDER HEAD, VALVETRAIN |
||
| 3.0L (DCDB) | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL FILTER/OIL PRESSURE SWITCH | ||
| Overhaul | 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN | ||
| Torque | Refer to the appropriate procedure in 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN | ||
| 4.0L (DCUE) | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | OIL FILTER/OIL PRESSURE SWITCH | ||
| Overhaul | 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN | ||
| Torque | 10 ENGINE ASSEMBLY , 13 CRANKSHAFT, CYLINDER BLOCK and 15 CYLINDER HEAD, VALVETRAIN | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm + 90° | ||
| Fuel System | |||
| Fuel Pressure Test Procedure | |||
| TRANSFER FUEL PUMP -G6-, CHECKING | |||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | |||
| 2.0L (DMFB) | N/A | ||
| 3.0L (DCDB) | N/A | ||
| 4.0L (DCUE) | N/A | ||
| Starting | |||
| Starter | N/A | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | N/A | ||
| Torque | N/A | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 160 Nm | ||