Rear Peripheral Camera -R246-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
The Rear Peripheral Camera -R246- is integrated in the Release Button in Rear Lid Handle -E234-. The Rear Peripheral Camera -R246- and the Release Button in Rear Lid Handle - E234- cannot be separated. If damaged, the entire Release Button in Rear Lid Handle -E234- must be replaced with the peripheral camera.
-- Remove and install the Release Button in Rear Lid Handle -E234-. Refer to COMPONENT LOCATION OVERVIEW - CONTROLS IN LUGGAGE COMPARTMENT .
- After removing and installing the Rear Peripheral Camera -R246-, it must be calibrated. Refer to PERIPHERAL CAMERA, CALIBRATING .