Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Remove the upper air duct. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .
-- Release and disconnect the connector -5-.
-- Remove the bolts -4-.
-- Remove the retaining plate -6-.
-- Remove the Front Peripheral Camera -R243- -1-.
If the retainer -7- should be removed:
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release the retaining tabs on the trim -2- and unclip the trim -2- forward from the radiator grille.
-- Remove the bolt -3-.
-- Remove the retainer -7- from the radiator grille.