Night Vision System Control Module -J853-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Lay the carpet at the left front of the center console. Refer to CARPET, REMOVING AND INSTALLING .
-- Remove the bolts -arrows-.
-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the direction of -arrow A- and remove it.
-- Release and disconnect the connectors -3-.
-- Remove the bolts -3-.
-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.