Passenger Occupant Detection System Control Module -J706-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Make sure the connectors are pushed in all the way and that they engage audibly.
- Perform the Passenger Occupant Detection System Control Module -J706- basic setting
-- Check and erase the airbag control module DTC memory because faults can be stored from when the connectors are disconnected. Use the Vehicle Diagnostic Tester.
Tightening specifications. Refer to COMPONENT LOCATION OVERVIEW - SEAT OCCUPANT DETECTION SYSTEM .