Service Interval Display, Resetting Service Event

Procedure :

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select the Diagnostic mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .

-- Switch to the "Special functions" tab.

-- Reset the service interval via ODIS "17 - delivery service".

-- Start the program using Perform test... .

-- Continue the program sequence.

NOTE:

The distance up to the current oil change service was determined by the driving profile of the customer. When the service interval display is reset, the distance to the next oil change service is recalculated based on this driving profile. Frequent cold starts or driving short distances use engine oil in significant quantities, causing the displayed distance to the next oil change service to vary based on the driving profile.