Overview - Laser Distance Regulation Control Module

Fig 1: Exploded View Of Laser Distance Regulation Control Module

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • For laser distance regulation control module
2. Mount
   • For Laser Distance Regulation Control Module -J1122-
   • Removing and installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
3. Spring
4. Adjuster
   • Removing and installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
   • Note the adjustment dimension. Refer to Measure the dimension -a- at the adjuster using the :VAS6335 and correct if necessary. .
5. Bolt
   • 6 Nm
6. Bolt
   • Tightening specification. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
   • Quantity: 2
7. Bolt
   • 4 Nm
   • Quantity: 2
8. Impact Member
9. Spray Nozzles
   • For laser distance regulation control module
   • Overview. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
10. Mount
11. Bolt
    • 4 Nm
    • Quantity: 2
12. Laser Distance Regulation Control Module -J1122-
    • Removing and installing. Refer to Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
    • Adjusting. Refer to LASER SENSOR (Laser Distance Regulation Control Module -J1122-), ADJUSTING .
13. Bolt
    • 6 Nm
    • Quantity: 2
14. Nut
    • Tightening Specifications and Sequence. Refer to Fig 2.
    • Quantity: 4

Laser Distance Regulation Control Module, Tightening Specification and Sequence

Fig 2: Laser Distance Regulation Control Module Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts to 7.5 Nm in the order shown: