Peripheral Camera Control Module -J928-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Component location. Refer to COMPONENT LOCATION OVERVIEW - SENSORS AND CONTROL MODULES IN CENTER SECTION OF VEHICLE .
-- Move the right front seat in the rearmost highest position.
-- Remove the expanding rivet -1 and 2-.
-- Push the cover -3- slightly forward -arrow- and remove.
-- Release the catch -arrow- and remove the Peripheral Camera Control Module -J928- -item 5- from the bracket -4-.
-- Disconnect the connector -1- and antenna wires -2 and 3-.