Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
- The clips must be replaced each time the front camera is removed.
-- Remove the clip -2- in the direction of -arrow- from the mount -1- and insert a new one.
-- Clean the viewing window on the windshield with Cleaning Solution:D 009 401 04 .
Install in reverse order of removal. Note the following:
-- Calibrate the driver assistance systems front camera after installation. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .