| 1 |
- CONNECT: Scan Tool.
- IGNITION: ON.
- CHECK: For stored or related DTCs.
-- Were any other DTCs stored? |
-- YES:
-- NO:
|
| 2 |
- Repair these DTCs first before performing any of the following steps.
|
- GO TO: Proper Diagnostic procedure per the stored DTC.
|
| 3 |
- Using the Scan Tool, erase the DTC memory.
- Perform a road test to attempt to duplicate the customers complaint.
-- Does DTC return? |
-- YES:
-- NO:
|
| 4 |
- Perform the diagnostic procedure for that DTC.
|
- GO TO: Proper Diagnostic procedure per the stored DTC.
|
| 5 |
- FAULT: Intermittent or a sporadic condition.
- CHECK: Suspected components.
- PERFORM: Visual Inspection of wiring and components.
- CHECK: Wiring for open, high resistance, short or harness connector for damage, corrosion, loose or broken terminals.
- REPAIR: Faulty wiring or connector.
|
- Perform a road test to verify the repair.
- Generate readiness code.
|