Windshield Projection Head Up Display Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Press out the cover -2- from the instrument panel -1- using the Wedge Set: T10383 .
-- Cover the control module -2- with a soft towel.
-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- Only remove the designated bolts from the control module.
- Never remove the bolts for the housing upper section.
-- Remove the bolts -1, 3 and 4-.
-- Lift the control module -2- out slightly and disconnect the connectors -3 and 4-.
-- Free up the wiring harness -1- -arrow-.
-- Remove the control module.