LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2023 >> RS 5 Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Assembly (DPAA)) >> 10 Engine Assembly >> Assembly Mounts >> Overview - Assembly Mounts >> Overview - Engine Mount
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overview - Engine Mount

WARNING: This page is about a different car, the 2024 Audi A5 Sportback and 2023 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Engine Mount
GWWA10-11960Courtesy of AUDI OF AMERICA, LLC
  1. Subframe
  2. Assembly Mount Sensor
    • Equipped on some models
      • Assembly Mount Sensor 1 -G748-, left side
      • Assembly Mount Sensor 2 -G749-, right side
    • Removing and Installing. Refer to the appropriate Service Information .
    • Installation position. Refer to Fig 3.
  3. Bolt
    • For  Overview - Engine Mount
    • thread cutting
    • Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
    • 11.5 Nm
  4. Bolt
    • 55 Nm
  5. Bolt
    • 20 Nm
  6. Bolt
    • 10 Nm
  7. Support Bearing
  8. Engine Support
  9. Bolt
    • 55 Nm
  10. Bolt
    • 10 Nm
  11. Heat Shield
  12. Engine Mount
    • with
      • Left Electrohydraulic Engine Mount Solenoid Valve -N144-
      • Right Electrohydraulic Engine Mount Solenoid Valve -N145-
    • Versions with
      • Assembly Mount Actuator 1 -N513-, right side
      • Assembly Mount Actuator 2 -N514- left
    • Removing and Installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
  13. Bolt
    • Replace after removing
    • 90 Nm + 90°
  14. Bolt
    • 30 Nm

      Support Bearing, Installation Position

      Fig 2: Support Bearing, Installation Position
      GWWA10-11984Courtesy of AUDI OF AMERICA, LLC
      • The raised section -2- of the engine support must engage into the opening -1- on the support bearing.

      Installation Position - Sensor with Assembly Mount Actuator

      Fig 3: Subframe Mount Sensor - Installation Position
      GWWA10-11435Courtesy of AUDI OF AMERICA, LLC
      • The sensor with the actuator -2- must engage in the hole -arrow- on the engine mount -1-.

      Assembly Mount Control ModuleJ931, Audi A6/A7

      Fig 4: Assembly Mount Control Module -J931-, Audi A6/A7
      GWWA10-12686Courtesy of AUDI OF AMERICA, LLC
      • Component location: in the left front wheel housing on the A-pillar.
      • Removing and Installing. Refer to the appropriate Service Information .

      -- Tighten the bolts -1- to 8 Nm.

      Assembly Mount Control ModuleJ931, Audi A8

      Fig 5: Assembly Mount Control Module -J931- Component Location
      GWWA10-12225Courtesy of AUDI OF AMERICA, LLC
      • Component location: in the left front wheel housing on the A-pillar.
      • Removing and Installing. Refer to the appropriate Service Information .

      -- Tighten the nuts -1 and 4- to 6 Nm.

      -- Tighten the bolts -arrows- to 6 Nm.

      GWWA10-12226Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals