Overview - Control Module For Adaptive Cruise Control
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- With Heating Element for Adaptive Cruise Control Radar Sensor - Z185-
- Removing and Installing. Refer to Heating Element for Adaptive Cruise Control Radar Sensor - Z185-, REMOVING AND INSTALLING .
- Cover
- Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Adjust the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
- Mount
- For Laser Distance Regulation Control Module -J1122-
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Cover
- Bolt
- Tightening specification. Refer to -Item ) Bolt.
- Quantity: 2
- Spring
- Adjuster
- Removing and Installing. Refer to ADJUSTER FOR Laser Distance Regulation Control Module -J1122-, REMOVING AND INSTALLING .
- Note the adjustment dimension. Refer to Installing - Measure the dimension -a- at the adjuster using the Digital Caliper: VAS6335 and correct if necessary. .
- Bolt
- Tightening specification. Refer to -Item ) Bolt.
- Spray Nozzles
- For Laser Distance Regulation Control Module -J1122-
- Different component locations
- Overview. Refer to OVERVIEW - HEADLAMP WASHER SYSTEM
- Washer Fluid Hose
- From the window washer pump
- Operating Lever for Adaptive Cruise Control
- Shared component with the steering column switch module. Cannot be replaced separately
- Removing and Installing. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING
- Instrument Cluster
- With Instrument Cluster Control Module -J285-
- Bolt
- Tightening specification. Refer to -Item ) Bolt.
- Quantity: 4
- Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to CONTROL MODULE FOR ADAPTIVE CRUISE CONTROL -J428-, REMOVING AND INSTALLING .
- Adjust the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIPS FOR Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Quantity: 3
- Stud Bolt
- Note the adjustment dimension. Refer to Installing - Measure the dimension .
- Quantity: 3
- Clip
- Open version
- Cannot be removed without being damaged
- Quantity: 2
- Clip
- Closed version
- Cannot be removed without being damaged
- Note the installation position
- Bolt
- 4 Nm
- Quantity: 4
- Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR CONTROL MODULE FOR ADAPTIVE CRUISE CONTROL -J428-, REMOVING AND INSTALLING .