Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
-- Clean the viewing window on the windshield with Cleaning Solution: D 009 401 04 .
-- The clip -1- must be replaced each time the front camera is removed. Remove the clip in the direction of the -arrow- from the mount -2- to do so.
-- Insert the guide -3- for the driver assistance systems front camera -1- into the right mount -2- and place the support -4- on the clip -5-.
-- Insert the support between the clip and the mount, and then push the support downward until it clicks into place.
- The support -4- must rest against the mount -6- -arrow-.
-- Calibrate the driver assistance systems front camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
- Conditions when the driver assistance systems front camera must be calibrated. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .