Passenger Occupant Detection System Control Module -J706-, REMOVING AND INSTALLING: Installing
Install in the reverse order of removal while noting the following:
- Make sure the connectors are pushed in all the way and that they engage audibly.
- Perform the Passenger Occupant Detection System Control Module -J706- basic setting
-- Check and erase the airbag control module DTC memory because faults can be stored from when the connectors are disconnected. Use the Vehicle Diagnostic Tester .
Tightening specifications. Refer to COMPONENT LOCATION OVERVIEW - SEAT OCCUPANT DETECTION SYSTEM Tighten the screws -2- to 1.5 Nm. .