Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
-- Clean the viewing window on the windshield with Cleaning Solution :D 009 401 04 .
-- The clip -1- must be replaced each time the front camera is removed. Remove the clip in the direction of the -arrow- from the mount -2- to do so.
-- Insert the guide -3- for the driver assistance systems front camera -1- into the right mount -2- and place the support -4- on the clip -5-.
-- Insert the support between the clip and the mount, and then push the support downward until it clicks into place.
- The support -4- must rest against the mount -6- -arrow-.
-- Calibrate the driver assistance systems front camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
- Conditions when the driver assistance systems front camera must be calibrated. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .