Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the cover -1- using the clip release lever in the direction of -arrows A, B, C- by carefully inserting the clip release lever between the windshield and the cover.

-- Repeat the procedure on the opposite side.

-- Disengage the front cover and remove toward the rear.

-- Free up the connector -2- and disconnect.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1 and 4- and remove the lens -3- forward from the mount in the direction of -arrow-.

-- Push the clip -5- toward the vehicle interior in the direction of -arrow- and guide the support -6- for the driver assistance systems front camera -1- downward and out the mount -7-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver assistance systems front camera to the right from the retaining plate mount -2-.

-- Disconnect the connector -3- and the antenna wire -4-.