ATF Level, Checking: Filling: Notes

-- Install The Adapter From The :Vas6262A  Into The Check Hole Hand-Tight.

Fig 1: Identifying Oil Filling Adapter - VAS 6262 A-

Courtesy of AUDI OF AMERICA, LLC

-- Shake The Fluid Containers Before Opening.

-- Attach The :Vas6262A  To The Fluid Bottle. Pay Attention To The Instructions While Doing So. Refer To Note The Following Information: .

-- Fill One Liter Of ATF.

-- Remove The :Vas6262A  At The Quick-Release Coupling And Check It.

If ATF Flows Out Of The Adapter Hole:

ATF Does Not Need To Be Topped Off.

-- Allow The ATF To Drain Until It Drips.

-- Tighten The ATF Check Plug With New Seal. The ATF Level Test Is Now Completed.

If No ATF Drips Out Of The Hole:

-- Add Another Liter. Refer To Filling .

• If The ATF Circuit Is Opened, It Must Be Bleed After Checking The ATF Circuit. Refer To ATF CIRCUIT, BLEEDING .
• Then The ATF Level Must Be Checked Again. Refer To Checking .