Windshield Projection Head Up Display Control Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2025 Audi S5 Sportback, 2025 Audi RS 5 Sportback, and 2025 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .
-- Press out the upper cover -2- from the instrument panel -1- -arrow- using the Wedge Set :T10383 .
-- Remove the bolts -arrows-.
-- Remove the frame -1-.
-- Cover the control module -3- with a soft towel.
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- Only remove the designated bolts from the control module.
- Never remove the bolts for the housing upper section.
-- Remove the bolts -1, 2, 4-.
-- Lift the control module slightly and disconnect the connector.
-- Remove the control module.