Outer Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2025 Audi SQ5 Sportback, 2025 Audi SQ5, 2025 Audi Q5 e, 2025 Audi Q5 Sportback, and 2025 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the instrument panel. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .

-- Cover the control module -2- with a soft towel.

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- Only remove the designated bolts from the control module.

- Never remove the bolts for the housing upper section.

-- Remove the bolts -1, 3 and 4-.

-- Lift the control module slightly and disconnect the connector.

-- Remove the control module.

-- Remove the nuts -arrows-.

Fig 1: Removing The Exterior Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1-.