Pin Arrangements All-Wheel Drive Control Module -J492-
| -T11b- (A) | Designation |
|---|---|
| 1 | Terminal 31 |
| 2 | All wheel drive clutch actuator 2 -V623-, near the rear axle |
| 3 | Terminal 30 |
| 4 | Drive shaft speed sensor -G970-, GND, near the rear axle |
| 5 | Drive shaft speed sensor -G970-, VCC, near the rear axle |
| 6 | Data-Bus Wire (FlexRay-Bus) |
| 7 | Data-Bus Wire (FlexRay-Bus) |
| 8 | Terminal 15 |
| 9 | Drive shaft speed sensor -G970-, Signal, near the rear axle |
| 10 | Data-Bus Wire (FlexRay-Bus) |
| 11 | Data-Bus Wire (FlexRay-Bus) |