Overview - Driver Assistance Systems Control Module

Fig 1: Exploded View Of Driver Assistance Systems Control Module

Courtesy of AUDI OF AMERICA, LLC

1. Bracket
   • There are different versions. Refer to the Electronic Parts Information (ETKA).
   • For the Driver Assistance Systems Control Module -J1121-
   • Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
2. Bolt
   • Quantity: 2
   • 8 Nm
3. Impact Guard
   • Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
4. Bolt
   • Control module "Low" : quantity: 2
   • Control module "High" : quantity: 3
   • 8 Nm
5. Clip
   • Attaching the impact guard to bracket
6. Bolt
   • For impact guard
   • Quantity: 3
   • 4.5 Nm
7. Bolt
   • Only on control module "Low"
   • 8 Nm
8. Bolt
   • Only on control module "High"
   • 8 Nm
9. Bolt
   • For the bracket
   • Quantity: 3
   • 4.5 Nm
10. Driver Assistance Systems Control Module -J1121-
    • There are different versions. Refer to the Electronic Parts Information (ETKA).
    • Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
11. Connector
12. Connectors
    • For the allocation, refer to the appropriate Wiring Diagram.