All Models

Before checking toe-in, vehicle must be in loaded condition (see CASTER & CAMBER ). Check toe-in with front wheels in straight-ahead position. If not within specifications, loosen tie rod clamping bolts. Rotate both tie rod tubes until toe-in is within specifications. Tighten clamping bolts.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Caster (Degrees)

Camber (Degrees)

Toe-In (Inches)

Toe-Out On Turns (Degrees)

Inner

Outer

2002

Front

4±1/2

1/2±1/2

0 to 3/32

.....

Rear

.....

-2±1/2

0 to 1/8

.....

3.0 Series

Front

9 1/2±1/2

0±1/2

0 to 3/32

.....

Rear

.....

⁽¹⁾-2±1/2

⁽²⁾1/32 to 1/8

.....

⁽¹⁾	3.0 CS - 1 1/2±1/2.

⁽²⁾

Unloaded.