Section 12 (Wheel Alignment Specifications & Procedures): Adjustment: Toe-In
WARNING: This page is about a different car, the 1984 BMW 533i and 1984 BMW 528e. However, it is still accessible from the selected car via links, so may be relevant.
Before checking toe-in, vehicle must be in loaded condition. See VEHICLE LOADING . Position steering gear to straight ahead and make sure that the marks on steering gear housing and steering shaft are aligned. If not within specifications, loosen tie rod clamps and turn tubes until correct toe-in is obtained. Tighten clamping bolts and make sure dust covers are not twisted.
VEHICLE LOADING
| Application | (1) Lbs. (kg) | ||
|---|---|---|---|
| Each Front Seat | 150 (68) | ||
| Rear Seat | 150 (68) | ||
| Luggage Compartment | 46 (21) | ||
|
|||