Valve Spring: Installation
Install springs with paint stripe (tight coil end) against head. Install retainer and keepers. All springs must have same color code, wire gauge and length. Install remaining components to complete installation.
VALVE SEAT DIAMETER
| Application | Diameter In. (mm) | |
|---|---|---|
| Intake | ||
| Standard | 1.659 (42.15) | |
| 0.2 mm O.S. | 1.667 (42.35) | |
| 0.4 mm O.S. | 1.675 (42.55) | |
| Exhaust | ||
| Standard | 1.482 (37.65) | |
| 0.2 mm O.S. | 1.490 (37.85) | |
| 0.4 mm O.S. | 1.498 (38.05) | |