61 00... Diagnosis for Condition Based Service: Notes

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Red symbol for pre-delivery check The vehicle is coded at the end of line so that the red symbol for the pre-delivery check is shown in the Next Service indicator (same symbol as vehicle check).
The symbol is a reminder to the Service staff that the pre-delivery check has not yet been carried out on this vehicle.

NOTE: Do not carry out a reset. Do not confuse this function with the "Vehicle check" scope of maintenance work. Do not run a reset with the KOMBI.
When executing the pre-delivery check with the "Transport mode / Pre-delivery check" service function: The symbol will be suppressed automatically after the service function has been executed.

Fig 1: Identifying Pre-Delivery Check Symbol

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Screen Display - Service Functions

Courtesy of BMW OF NORTH AMERICA, INC.

Item	Explanation
1	Function and component selection
2	Service functions
3	Maintenance
4	Transport mode/pre-delivery check
5	CBS correction, tester data
6	Reset CBS Condition Based Service
7	CBS vehicle data correction