LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2000 >> 323Ci 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Body Equipment - Repair) >> Electrical Power Windows, Body >> 51 31... Notes on window bonding >> Adhesive quantities
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Adhesive quantities

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Approx. 1 1/4 glue cartridges are required to bond the windscreen on the following vehicles:

Effect of differing adhesive quantities:

Too little adhesive: Too much adhesive:
  • Window glass rests too low in body aperture
  • Strains/tensions may occur (window glass breakage)
  • Insufficient squeezing of adhesive bead (leaking)
  • Window glass rests too high in body aperture
  • Wind noise may occur
  • Strains/tensions may occur (window glass breakage)
  • Dirt contamination of add-on parts by emerging adhesive
  • Adhesive on uninsulated strainer pressure lines of aerial(s) (interference of reception)