37 00.. Notes on air spring system
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Components / pipes
IMPORTANT:
Maintain the highest possible standards of cleanliness around the pipe connections when dismantling and assembling components/pipes. Even the tiniest dirt particles on the pipe connections or damage to the pipes can result in leaks in the air spring system!
Do not kink, twist or crush lines.
Do not kink, twist or crush lines.
Pipe connections must be sealed off with adhesive tape immediately after they have been removed. The adhesive tape may only be removed shortly before the connection is reinstalled.
Air suspension strut / air spring
NOTE:
If a vehicle has been driven with a depressurized air spring strut/air spring, the air spring strut/air spring must always be replaced.