Measurement System

Measurement system is an integral part of the test procedure. It displays automatically when needed by the test schedule. Measurement instructions are provided in bottom right dialogue box as voltage measurement MFK 1 (+) ON (circuit name) or MFK 1 (-) ON ground. All measurements relate to circuit name acronyms that are hot spot activated (if needed). Nominal values are displayed with the actual measured display.

If using a DVOM for measuring values in place of DIS/MoDiC MFK leads, enter measured values into system and follow test plan by pressing measurement system value display bar to bring up a key pad. Enter measured value into key pad and press enter button. DIS /MoDiC uses entered values to continue with test plan. Before diagnosis is terminated, a dialogue box reminds user to print diagnosis report. Diagnosis reports must be printed when diagnosis session is active. Once terminated, diagnosis report cannot be accessed for print. Dialogue box offers the following options:

• TERMINATE ends diagnosis without printing the diagnosis report.
• DIAGNOSIS REPORT prints report before terminating.