Body Trim: Glass/Windshield

The E65 has green heat reflecting glass in all its windows and the windshield is equipped with ultraviolet protection.

The glass is 6-7 mm thick and the black moulding strip around the windows has an internal water drain.

The windshield has a silk-screen print spot pattern around the border edge and the park zone for the wipers is electrically heated.

The windshield has a viewing panel for the vehicle identification number.

The mounting plate for the rearview mirror is bonded to the windshield glass.

In order to remove the windshield, the new snap on roof moulding needs to be removed first. The one piece moulding extend all the way from the A-pillars to the C-pillars. The trim beneath the windshield also needs to be removed.

The E-65 incorporates a heat control windshield that helps prevent heat build up inside the passenger compartment. The rain/light sensor prism is bonded to the windshield.