ZGM Internal Control-Module Fault (61 04 02)
Publication date: 2002-05-01Reference number: 61 04 02
ZGM INTERNAL CONTROL-MODULE FAULT
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI B 61 04 02, Date of Issue:
May 2002
| BMW: | E65/E66 (7 Series) |
| GROUP: | 61 - General Electrical Systems |
SUBJECT
ZGM Internal Control-Module Fault
SITUATION
When programming a ZGM, an undeletable fault code may be stored.
The fault code is 932D Internal control-module fault .
CAUSE
Programming the ZGM more than once with the same DIS SW version
PROCEDURE
Do not replace ZGM, and ignore the fault, if vehicle systems function normally .
Note that fault 932D may also be set for an internal ZGM defect. In this case functionality will be affected. To diagnose this fault in case of impaired functionality follow the test plan in DIS diagnosis.
WARRANTY INFORMATION
For information only.