32 00... Move Vehicle Into Normal Position
Necessary Preliminary Tasks:
- Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA .
- Version With Air Spring System: Carry out ride-height-calibration. Refer to RIDING HEIGHT .
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle.
- Determine vehicle ride height. Refer to RIDING HEIGHT .
NOTE:
If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA
), the vehicle must be repaired (coil spring/leakage).