Introduction & History: Introduction

The Z8 is a two-seater sports car following the tradition of the 507. The vehicle design is a combination of classic style elements and modern BMW technology.

Fig 1: Identifying BMW Z8

Courtesy of BMW OF NORTH AMERICA, INC.

The complete body of the Z8 is made of aluminum. The vehicle is finish built as a limited production in the Munich plant.

The Z8 is designed as a classic roadster featuring a long hood, short overhang, rear-wheel drive and a soft top. Clearly seen above and right, it also features design elements typical of BMW roadsters such as the standard grilles on the front fenders.

Typical for a roadster, the interior is both compact while at the same time setting new design standards.

Fig 2: Rear View Of Z8

Courtesy of BMW OF NORTH AMERICA, INC.

The instruments are located in the center of the instrument panel. This allows the driver to fully concentrate on the road ahead.

Fig 3: Identifying Instrument Panel

Courtesy of BMW OF NORTH AMERICA, INC.

The underhood view below reveals the cleanly laid out engine compartment. The Z8 is powered by the BMW 5 liter S62 V8 engine, developing 394 bhp and a maximum torque of 500 Nm.

Fig 4: Identifying Engine Overview

Courtesy of BMW OF NORTH AMERICA, INC.