32 00... Move Vehicle Into Normal Position

Necessary preliminary tasks: 

• Check compliance with test conditions, bring vehicle to a stop if necessary. Refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA .
• Version with air spring system:
  • Carry out ride-height-calibration 37 12 010 CARRY OUT RIDE-HEIGHT CALIBRATION
  • Pull fuse(s) for air supply unit control unit
• Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
• Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle
• Determine vehicle ride height, refer to RIDING HEIGHT

Note: If the vehicle ride height is not inside the tolerance (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).