ATEQ TPMS Reset Procedure

NOTE: Perform the initialization immediately after correcting the inflation pressure, after changing a tire or changing a wheel or all wheels. A drive is necessary for this purpose.

Set the tire pressure of all wheels to specified pressure.
Start the engine, but do not drive off.
Open the "i" menu.
Select "Vehicle settings" and press the controller.
Select "FTM" and press the controller.
Select "Set tire pressure" and press the controller.
Select "Yes" and press the controller.
Drive the vehicle. The message "Initializing" is displayed.
After the initialization is completed, the message "Active" is displayed.